All Products

Showing 133-144 of 309 products

Sort by:

Sensors

ZMOD4410 Indoor Air Quality Sensor Breakout Board

The Boardoza ZMOD4410 Sensor Module has a wide measurement range and is a reliable breakout board based on the Renesas ZMOD4410 gas sensor with I²C connectivity. It is designed for high-precision indoor air quality monitoring and provides digital measurements for Total Volatile Organic Compounds (TVOC) and estimated CO₂ concentrations. The module is suitable for HVAC systems, smart home devices, air purifiers, and environmental sensing applications.

Sensors

INA228 Current and Power Monitor Breakout Board

High-Precision Power Measurement with B-INA228-BRK The B-INA228-BRK breakout board features Texas Instruments’ industry-leading INA228 power monitor . With its onboard 15 mΩ shunt resistor, it measures 20-bit resolution and less than: ±0.05% error, while the VBUS pin allows direct voltage monitoring from 0 V to 85 V. The high-speed I²C interface (SCL/SDA), programmable ALERT output, and integrated triangular time filter make it easy to detect sudden load changes and protect your system. Equipped with a standard 5-pin header (VCC, GND, SDA, SCL, ALERT) and built-in pull-up resistors, the module integrates into microcontroller projects in minutes. From industrial power supplies and battery management systems to IoT nodes and power efficiency analyzers, the B-INA228-BRK provides reliable data in both prototyping and mass production. Its compact layout and high-quality passive components ensure excellent noise immunity and stable performance in any environment. Additional Notes: - A0 and A1 default to LOW through the R6 and R7 pull-down resistors. Close the corresponding A0 or A1 solder jumper to connect that address input to VCC; select each bit independently. - The VBUS1 solder jumper is open by default. Close it to connect the VBUS sense input to VIN+ for simultaneous current and high-side bus-voltage measurement. The VBUS input may also be accessed through the labelled VBUS terminal.

Sensors

HC-SR04-B Ultrasonic Distance Sensor Breakout Board

The CS100A ultrasonic ranging IC-based ultrasonic distance sensor board is a compact and high-precision solution designed for non-contact distance measurement. The board operates by transmitting ultrasonic pulses and analyzing the reflected echo to determine the distance to an object. The system utilizes an 8 MHz crystal oscillator to provide stable timing and operating frequency. It employs two ultrasonic transducers to transmit and receive acoustic signals. Through the TRIG and ECHO interface pins, the module can be easily integrated with microcontrollers. This architecture enables reliable performance in applications such as robotics, industrial automation, distance sensing, and obstacle detection. The board is designed with a minimal component count, ensuring high stability and low power consumption. Its simple interface makes it suitable for both embedded system developers and electronics designers who require an efficient ultrasonic measurement module.

RF Communication

TUSB8041 Four-Port USB 3.0 Hub Breakout Board

Boardoza TUSB8041 USB Hub Board is a high-performance USB expansion solution that provides four USB Type-A ports from a single USB Type-C upstream connection. Based on the Texas Instruments TUSB8041, the board supports USB 3.0 SuperSpeed data transfer up to 5 Gbps while remaining fully backward compatible with USB 2.0 and USB 1.1 devices. It operates out of the box without any programming or configuration, making it ideal for embedded systems, industrial applications, and development platforms requiring reliable high-speed USB connectivity.

RF Communication

CC2652P Wireless Evaluation Board

The Boardoza CC2652P Wireless Evaluation Board is a project intended for exploring wireless-communication hardware around the CC2652P in an evaluation-board project. The board is currently under development, with its design and documentation being finalized. Detailed electrical specifications and integration requirements remain subject to completion of this work.

Data Converters

TCA6408A 8-Bit I²C I/O Expander Breakout Board

The TCA6408A is a 16-pin device that provides 8- bits of general purpose parallel input/output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus) protocol. This device can operate with a power supply voltage ranging from 1.65 V to 5.5 V on both the I2C bus side (VCCI) and on the P-port side (VCCP). This allows the TCA6408A to interface with next-generation microprocessors and microcontrollers on the SDA/SCL side, where supply levels are dropping down to conserve power. In contrast to the dropping power supplies of microprocessors and microcontrollers, some PCB components such as LEDs remain at a 5-V power supply. The device supports both 100-kHz (Standard-mode) and 400-kHz (Fast-mode) clock frequencies. I/O expanders such as the TCA6408A provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and so forth.

RF Communication

LoRa-E5-HF LoRaWAN Development Board

The Seeed Studio LoRa-E5-HF development board is a professional LoRaWAN solution designed for IoT projects that require long-range wireless communication and ultra-low power consumption. Thanks to its LoRa-E5 module, it can establish reliable communication with gateways several kilometers away, offering 22 dBm output power, high receiver sensitivity, and strong RF performance. Drawing only 2.1 µA in sleep mode, the board is especially ideal for battery-powered sensors. With USB Type-C and external battery input, built-in LoRaWAN protocol, AT command support, and a rich GPIO interface (UART, I2C, ADC, SWD), it provides developers with fast integration and easy usability. Its next-generation LoRa infrastructure delivers higher range, better sensitivity, and lower power consumption compared to many alternatives. For users seeking a reliable and energy-efficient solution in agriculture, smart cities, industrial monitoring, meter reading, and other long-range IoT applications, this board offers high performance and ease of use.

Sensors

AMG8833 Grid-EYE Infrared Thermal Sensor Breakout Board

The AMG8833 Infrared Thermal Sensor Breakout Board is designed to enable fast and reliable integration of the Panasonic AMG8833 Grid-EYE infrared thermal sensor into embedded systems. The board features an onboard LDO regulator that provides the 3.3 V supply voltage required by the sensor, allowing it to operate seamlessly with 5 V systems. In addition, the onboard bidirectional I²C level shifter enables compatibility with both 3.3 V and 5 V logic-level systems. The AMG8833 features an 8 × 8 pixel (64-point) infrared sensing array capable of measuring temperature distribution without physical contact and communicates via the I²C interface. The board also includes a power indicator LED, the required bypass capacitors, and I²C pull-up resistors. It can be easily interfaced with Arduino, STM32, ESP32, Raspberry Pi, and other I²C-compatible development platforms. The board is suitable for a wide range of applications, including human presence detection, motion sensing, thermal mapping, smart building systems, and industrial temperature monitoring.

RF Communication

E22-900M22S LoRa Transceiver Breakout Board

The E22-900M22S breakout board integrates Ebyte’s E22-900M22S LoRa® module, built around the Semtech SX1262 long-range RF transceiver. This new-generation radio supports the 850–930 MHz ISM bands (including 868 MHz and 915 MHz), delivers up to 22 dBm output power, and is specified for communication distances of several kilometers in line-of-sight conditions. On the breakout, the module’s SPI interface (CS, SCK, MISO, MOSI) and control pins (DIO1, DIO2, BUSY, NRST, RXEN, TXEN) are brought out to convenient pads/headers, making it easy to connect to popular MCUs such as STM32, ESP32 or Arduino-class boards. The onboard 32 MHz high-precision TCXO provides excellent frequency stability over temperature, which is important for narrow-band LoRa links and operation in harsh outdoor environments.

Power Management

BQ7791500 Power Management Board

The Boardoza BQ7791500 Power Management Board is a project intended for exploring battery-related power-management hardware around the BQ7791500 in a dedicated board project. The board is currently under development, with its design and documentation being finalized. Detailed electrical specifications and integration requirements remain subject to completion of this work.

RF Communication

MCP2515 CAN Bus to SPI Breakout Board

Boardoza MCP2515 is a CAN Bus to SPI Converter Module based on the MCP2515 CAN controller and the TJA1050 CAN transceiver. It allows microcontrollers (Arduino, STM32, ESP32, Raspberry Pi, etc.) to communicate over the CAN Bus protocol via a simple SPI interface. The module is widely used in automotive, industrial, and robotics applications. The MCP2515 handles the low-level CAN protocol conversions, while the TJA1050 provides the physical layer interface for differential CAN communication. With MCP2515 module, you can create CAN Bus network with multiple Data sending/receiving nodes without the need of built-in CAN peripherals in microcontrollers.

RF Communication

TUSB9261 Data Converter Breakout Board

The Boardoza TUSB9261 Data Converter Breakout Board is a project intended for exploring communication-related data-conversion hardware centered on the TUSB9261. The board is currently under development, with its design and documentation being finalized. Detailed electrical specifications and integration requirements remain subject to completion of this work.

←1…11 12 13…26 →