Data Converters

Showing 1-12 of 16 products

Sort by:

Data Converters

Boardoza MCP4725 12-Bit I²C DAC Breakout Board

The MCP4725 is a low-power, high accuracy, single channel, 12-bit buffered voltage output Digital-toAnalog Convertor (DAC) with non-volatile memory (EEPROM). Its on-board precision output amplifier allows it to achieve rail-to-rail analog output swing. The DAC input and configuration data can be programmed to the non-volatile memory (EEPROM) by the user using I2C interface command. The non-volatile memory feature enables the DAC device to hold the DAC input code during power-off time, and the DAC output is available immediately after power-up. I2C address bit selection pin (A0 bit) is connected to GND by default.

Data Converters

Boardoza ADS1115 16-Bit I²C ADC Breakout Board

This board features the ADS1115, a low-power 16-bit analog-to-digital converter with I²C interface. It supports both single-ended and differential input measurements, making it ideal for precise sensor readings in compact systems. With its wide input range and built-in voltage reference, the board is well-suited for general-purpose analog signal acquisition in embedded applications.

Data Converters

Boardoza MCP3462RT ADC Breakout Board

The Boardoza MCP3462RT ADC Breakout Board is a project intended for exploring analog-to-digital conversion around the MCP3462RT for data-acquisition development. The board is currently under development, with its design and documentation being finalized. Detailed electrical specifications and integration requirements remain subject to completion of this work.

Data Converters

Boardoza DS1069 Breakout Board

The Boardoza DS1069 Breakout Board is a project intended for exploring component-level evaluation and connection concepts centered on the DS1069. The board is currently under development, with its design and documentation being finalized. Detailed electrical specifications and integration requirements remain subject to completion of this work.

Data Converters

Boardoza TCA6408A 8-Bit I²C I/O Expander Breakout Board

The TCA6408A is a 16-pin device that provides 8- bits of general purpose parallel input/output (I/O) expansion for the two-line bidirectional I2C bus (or SMBus) protocol. This device can operate with a power supply voltage ranging from 1.65 V to 5.5 V on both the I2C bus side (VCCI) and on the P-port side (VCCP). This allows the TCA6408A to interface with next-generation microprocessors and microcontrollers on the SDA/SCL side, where supply levels are dropping down to conserve power. In contrast to the dropping power supplies of microprocessors and microcontrollers, some PCB components such as LEDs remain at a 5-V power supply. The device supports both 100-kHz (Standard-mode) and 400-kHz (Fast-mode) clock frequencies. I/O expanders such as the TCA6408A provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs, fans, and so forth.

Data Converters

Boardoza TPC2192 8-Channel 12-Bit DAC Breakout Board

Boardoza TPC2192 BRK is a compact breakout board built around the 3Peak TPC2192 8-channel, 12-bit Digital-to-Analog Converter (DAC) integrated circuit. The module delivers a rapid 6 µs output settling time and supports high-speed 4-wire SPI communication up to 20 MHz (SDI, SDO/ALRM, SCLK, nCS). Voltage reference selection is flexible: it can utilize the chip's integrated low-drift 2.5V internal reference or accept an external reference voltage from the REF pin, with software-configurable full-scale output gain options of 1/2, 1, or 2. The board features a digital I/O voltage rail (VIO) that is connected to VDD over JP1 by default. Opening JP1 separates VIO from VDD voltage, allowing it to be driven by an independent power rail (1.7V \~5.5V). The Boardoza TPC2192 BRK is widely used in industrial automation, optical networking, data acquisition systems, multi-channel sensor calibration, and automated test equipment (ATE).

Data Converters

Boardoza ADS131A04 4-Channel 24-Bit Precision ADC Breakout Board

Boardoza ADS131A04 ADC Board is a high-performance data acquisition solution designed for precision differential signal measurement. Based on the 24-bit ADS131A04 ADC, the board supports 4 simultaneous differential input channels with low noise and high dynamic range performance. With programmable gain, high-resolution conversion, and SPI communication support, it is suitable for industrial monitoring, energy metering, sensor interfacing, and precision measurement systems requiring accurate multi-channel analog acquisition.

Data Converters

Boardoza TPC2160 16-Bit Unipolar DAC Breakout Board

Boardoza TPC2160 is a low-power, high-performance 16-bit digital-to-analog converter (DAC) breakout board designed for applications demanding extreme precision and minimal noise. This board is engineered for high-fidelity signal generation, offering full 16-bit performance with a remarkable ±1 LSB integral nonlinearity (INL). Configured for unipolar output mode with an onboard precision 3.0V reference voltage, the Boardoza TPC2160 provides a clean 0V to 3.0V analog swing. While most standard DACs struggle with "glitch" energy during code transitions, this board features a low-glitch architecture (10 nV-sec), making it ideal for high-purity wave generation and precision in applications such as industrial control systems.

Data Converters

Boardoza FFC/FPC Adapter Breakout Board

The Boardoza FFC/FPC Adapter Breakout Board is a project intended for exploring flexible-cable connector adaptation through the FFC/FPC adapter-board concept. The board is currently under development, with its design and documentation being finalized. Detailed electrical specifications and integration requirements remain subject to completion of this work.

Data Converters

Boardoza TPC2161 16-Bit Bipolar DAC Breakout Board

Boardoza TPC2161 is a 16-Bit Digital to Analog Converter Breakout Board based on the TPC2161 DAC , dual polarity LDO regulator , and voltage reference IC. It allows microcontrollers (Arduino, STM32, ESP32, Raspberry Pi, etc.) to generate highly precise analog voltage outputs via a simple 3-wire SPI interface. The module is widely used in industrial automation, medical instrumentation, wave generators, and precision bias voltage control. Additionally, the onboard output buffer op-amp provides low-impedance rail-to-rail driving capability for the analog output signal (-2,5V to +2,5V). With the Boardoza TPC2161 module, you can easily implement ultra-low-noise, bipolar or unipolar precise voltage control loops without the need for complex external dual-rail power setups or external analog buffer circuits.

Data Converters

Boardoza TPC2190 8-Channel 16-Bit DAC Breakout Board

Boardoza TPC2190 BRK is a compact breakout board built around the 3Peak TPC2190 8-channel, 16-bit Digital-to-Analog Converter (DAC) integrated circuit. The module delivers a rapid 6 µs output settling time and supports high-speed 4-wire SPI communication up to 20 MHz (SDI, SDO/ALRM, SCLK, nCS). Voltage reference selection is flexible: it can utilize the chip's integrated low-drift 2.5V internal reference or accept an external reference voltage from the REF pin, with software-configurable full-scale output gain options of 1/2, 1, or 2. The board features a digital I/O voltage rail (VIO) that is connected to VDD over JP1 by default. Opening JP1 separates VIO from VDD voltage, allowing it to be driven by an independent power rail (1.7V \~5.5V). The Boardoza TPC2190 BRK is widely used in industrial automation, optical networking, data acquisition systems, multi-channel sensor calibration, and automated test equipment (ATE).

Data Converters

Boardoza USB Type-C Connector Breakout Board

The Boardoza USB Type-C Connector Breakout Board is a project intended for exploring connector access and footprint adaptation for USB Type-C hardware projects. The board is currently under development, with its design and documentation being finalized. Detailed electrical specifications and integration requirements remain subject to completion of this work.

←1 2 →