The RFM6601W is a LoRa wireless communication module designed by HOPERF. It contains a LoRa wireless communication chip, an RF transmitter/receiver and a 32-bit RISC microcontroller (MCU). This MCU uses the ARM Cortex M4 processor and has an operating frequency of 48 MHz. The RF transmitter/receiver has continuous frequency coverage from 150 MHz to 960 MHz.
Where to buy?
| Item | RFM6601W |
|---|---|
| Voltage Supply | 3.3V – 5V |
| Functions | BDS/GNSS multi-mode satellite navigation receiver SOC module. |
| Communication | UART |
| Operating Temperature | -40°C to 85°C |
| Board Dimensions | 40 x 40 mm |
| (J1)PIN Number | PIN Name | Ground |
|---|---|---|
| 1 | GND | Power Supply |
| 2 | TX | 2 MCU GPIO (UART_RXD) |
| 3 | RX | MCU GPIO (UART_TXD) |
| 4 | CLOCK | SWD CLK |
| 5 | DATA | SWD DATA |
| 6 | RESET | Reset signal, active low |
| 7 | VDD | +3.3V/+5V Input voltage |
| PIN Number | PIN Name | MCU GPIO |
|---|---|---|
| 1 | GPIO32 | MCU GPIO |
| 2 | GPIO33 | MCU GPIO |
| 3 | GPIO37 | MCU GPIO |
| 4 | GPIO1 | MCU GPIO |
| 5 | GPIO0 | MCU GPIO |
| 6 | GPIO03 | MCU GPIO |
| 7 | GPIO02 | MCU GPIO |
| 8 | GPIO16 | MCU GPIO |
| 9 | GPIO14 | MCU GPIO |
| 10 | GPIO15 | MCU GPIO |
| PIN Number | PIN Name | MCU GPIO |
|---|---|---|
| 1 | GPIO44 | MCU GPIO |
| 2 | GPIO45 | MCU GPIO |
| 3 | GPIO47 | MCU GPIO |
| 4 | GPIO09 | MCU GPIO |
| 5 | GPIO04 | MCU GPIO |
| 6 | GPIO05 | MCU GPIO |
| 7 | GPIO08 | MCU GPIO |
| 8 | GPIO11 | MCU GPIO |
| 9 | GPIO58 | MCU GPIO |
| 10 | GPIO60 | MCU GPIO |
Subscribe to Boardoza E-mail Newsletter
Corporate
Resources
Follow Us
All rights reserved. Boardoza is a subsidiary of Özdisan.
For communication info@boardoza.com
Address
Dudullu OSB Mahallesi DES Sanayi Sitesi 104. Sok. A7 Blok No:54-56, 34776 Ümraniye
