Boardoza ATA6561 High-Speed CAN Transceiver Breakout Board
The Boardoza ATA6561 Breakout Board is a high-speed CAN (Controller Area Network) transceiver module built around the Microchip ATA6561 IC. It enables reliable communication between a CAN controller and the physical two-wire CAN bus. Supporting data rates of up to 5 Mbps, the board is well suited for modern automotive, industrial CAN, and CAN FD applications. Designed for robust operation in harsh environments, the ATA6561 provides strong EMC and ESD performance, a low-power standby mode with CAN wake-up capability, and passive bus behavior when unpowered. Its selectable 3.3 V and 5 V logic-level support ensures compatibility with a wide range of microcontrollers, making it suitable for embedded systems, automotive electronics, and industrial automation projects.
Temel Özellikler
- High-Speed CAN Transceiver: Supports CAN FD communication up to 5 Mbps.
- Flexible Logic Levels: Selectable voltage level for a 3.3V and 5V MCUs.
- Low Power Standby Mode: Includes remote wake-up via CAN bus.
- Integrated Termination: Onboard 120Ω resistor with solder jumper control.
- Robust Protection: High EMC performance and strong ESD protection.
- Fail-Safe Features: Includes 7 integrated fail-safe mechanisms for reliable operation.
- Automotive-Grade: Qualified for automotive and industrial applications.
Teknik Özellikler
- Model
- ATA6561
- Üretici
- Boardoza
- Üretici
- Microchip Technology
- Fonksiyonlar
- High-Speed CAN FD Transceiver
- Giriş Voltajı
- 4.5V – 5.5V
- Logic I/O Voltage
- 3.3V or 5V (selectable)
- Maximum Data Rate
- Up to 5 Mbps
- Standby Mode Current
- Low-power mode supported
- ESD Protection
- ±8 kV (IEC 61000-4-2, CANH/CANL) ±6 kV (HBM, CANH/CANL to GND)
- Operating Temperature Range
- –40°C to +150°C
- Kart Boyutları
- 20mm x 40mm
Kart Pin Yapısı
( J1 ) Control & Logic Header
| Pin Numarası | Pin Adı | Açıklama |
|---|---|---|
| 1 | 5V | Power Supply Input (4.5V–5.5V) |
| 2 | STB | Standby Mode Control Input |
| 3 | TXD | Transmit Data Input from MCU |
| 4 | RXD | Receive Data Output to MCU |
| 5 | GND | Ground |
( J2 ) CAN Bus Connector
| Pin Numarası | Pin Adı | Açıklama |
|---|---|---|
| 1 | CANL | Low-Level CAN Bus Line |
| 2 | GND | Ground |
| 3 | CANH | High-Level CAN Bus Line |
( JP1 ) Termination Jumper
| Pin Numarası | Pin Adı | Açıklama |
|---|---|---|
| 1 | 120Ω Termination | Short to enable onboard 120Ω CAN bus termination resistor |
Datasheet
İndir (PDF)Destek
Teknik sorular, dokümantasyon ve hata bildirimleri için GitHub deposunu kullanabilir veya doğrudan bize yazabilirsiniz.